Tanning beds are a popular method of getting that perfect sun-kissed glow without having to step out in the harsh UV rays. However, with regular use, tanning beds can accumulate dirt, sweat, and oils which can not only be unhygienic but also decrease the effectiveness of the tanning lamps.
Cleaning your tanning bed regularly is required to maintain its longevity and maximizing its results. Follow these tips to clean your tanning bed Dubai at home without damaging the lamps.
Use soft microfiber cloths:
Standard paper towels can leave small scratches on the smooth surface. These tiny marks catch dirt and make the bed look dull over time. A soft cloth picks up dust without rubbing the finish too hard. It is the safest way to wipe away sweat after a session. Always keep a few clean cloths nearby for quick use.
Pick a gentle cleaner:
Harsh soaps often contain chemicals that react badly with heat. Thick residues can bake onto the glass when the lights turn on. A mix of distilled water and a tiny bit of mild dish soap works well. Avoid anything with ammonia because it makes the plastic brittle and cloudy. This light solution removes body oils without leaving a sticky film.
Wipe the lamps carefully:
Dust settles on the bulbs and lowers the heat they give off. Wait until the equipment is completely cool before touching anything inside. Gently rub each bulb with a dry cloth to remove gray film. Do not spray liquids directly onto the electronics or the light tubes. Keeping these parts dust-free helps the machine run smoothly. Clean bulbs mean the light reaches the skin without any blockages.
Check the fan vents:
Cooling fans pull in air and often trap lint or pet hair. When vents get clogged, the internal temperature rises too high. This extra heat can shorten the life of the expensive bulbs. Use a small vacuum or a soft brush to clear the openings. Keeping the air flowing prevents the system from getting too hot during use.
Focus on the acrylic shield:
The clear layer between the body and the bulbs is very sensitive. Never use glass cleaners meant for windows on this specific part. Those products can cause the material to crack or yellow under UV light. Only use items made for soft plastics to keep the shield transparent.
